1P0

Halfbridge Transducer 73.75 mV/Vmm sensitivity and ± 0.40 mm measuring stroke. Cable 2 m, cable exit radial. (ex Machsize and Nairda)

Articlenumber
1000031
Product Image
Properties
  • Total Stroke, Measuring stroke (symmetrical ±), Pretravel default setting, Bearing, Lifetime, Tip rotation, Temperatur range, Mounting position, Tip, Bellow, Body diameter, Plug, Cable
    Total Stroke
    1.5 mm
    Measuring stroke (symmetrical ±)
    0.40 mm
    Pretravel default setting
    - 0.40 mm
    Bearing
    Ball bearing, no side-play
    Lifetime
    > 10 Mio. Cycles
    Tip rotation
    1.5° over full stroke
    Temperatur range
    -10 to +65 °C, storage and operation
    Mounting position
    any
    Tip
    4 mm tungsten carbide ball
    Bellow
    Nitril
    Body diameter
    5h6
    Plug
    5 pin, 240°
    Cable
    PUR shielded, Length 2 m
  • Advance, Spring rate, Spring rate information
    Advance
    spring push
    Spring rate
    0.78 N
    Spring rate information
    at electrical zero, tolerance ± 20%
  • Repeatability, Linearity error
    Repeatability
    0.02 µm
    Linearity error
    1.25% FS ± 400 µm range (at 20 °C ± 1°C)
  • Sensitivity, Amplifier input load, Supply voltage, Drive frequency, Coil scheme
    Sensitivity
    73.75 mV/(Vmm)
    Amplifier input load
    2 kOhm Input resistance, ± 0.1%
    Supply voltage
    3.0 V ±0.5%RMS
    Drive frequency
    13.0 kHz ±5%
    Coil scheme
    Halfbridge, TESA® compatible
  • Documents information
    Documents information
    All drawings and 3D models are shown in "electrical zero" position.