Comparison

T501P

Halfbridge Transducer with 7.38 mm/Vmm sensitivity and ± 5 mm measuring stroke, Pretravel adjustable. Pneumatic push. Cable 2 m, cable exit axial.

Articlenumber

1001778

Datasheet

Product Image

Properties

Total Stroke, Measuring stroke, Pretravel, Pretravel default setting, Bearing, Lifetime, Tip rotation, Temperatur range, Mounting position, Tip, Bellow, Body diameter, Plug, Cable feature, Cable information

Total Stroke

10.6 mm

Measuring stroke

± 5.0 mm

Pretravel

adjustable

Pretravel default setting

+ 5.5 mm

Bearing

Ball bearing, no side-play

Lifetime

> 10 Mio. Cycles, bellow wear part exchangeable

Tip rotation

1° over full stroke

Temperatur range

-10 to +65 °C, storage and operation

Mounting position

any

Tip

Ø 3.0 mm tungsten carbide ball, M2.5 fixing thread, exchangeable

Bellow

FPM

Body diameter

Ø 8h6

Plug

M16x0.75, 5-pin, DIN45322

Cable feature

PUR shielded, length 2 m

Cable information

Outer- Ø 4.0 mm, drag chain compatible
Advance, Lift off, Pressure Pmax, Pressure P application, Spring rate, Spring rate information

Advance

pneumatic

Lift off

return spring

Pressure Pmax

1.5 bar

Pressure P application

1.2 bar

Spring rate

F = f(p) N

Spring rate information

apx. 2.0 N at 1.2 bar / apx. 1.5 N at 0.9 bar (at el. zero)
Repeatability, Linearity error

Repeatability

0.02 µm

Linearity error

0.8% FS (full-scale) ± 5000 µm range (at 20 °C ± 1°C)
Sensitivity, Setting, Optional sensitivity setting, Setting optional, Amplifier input load, Drive frequency, Supply voltage, Coil scheme

Sensitivity

7.38 mV/(Vmm)

Setting

1:10

Optional sensitivity setting

14.76 mV/(Vmm)

Setting optional

1:5

Amplifier input load

2 kOhm Input resistance, ± 0.1%

Drive frequency

13.0 kHz ±5%

Supply voltage

3.0 V ±0.5%RMS

Coil scheme

Halfbridge, TESA® compatible
Documents information

Documents information

All drawings and 3D models are shown in "electrical zero" position.