T102PIOL

Advance

pneumatic

Lift off

return spring

Pressure Pmax

1.5 bar

Pressure P application

0.8 bar

Spring rate

F = f(p) N

Spring rate information

apx. 1.0 N at 0.8 bar / apx. 0.6 N at 0.6 bar (at el. zero)

Repeatability

0.05 µm

Error limit

±1.0 µm (at 20 °C ±1 °C)

Measuring rate

150 measurements/ sec

Power supply

24V

Power consumption

120 mW

Measuring system

Plunger, Inductive Half Bridge. Integrated conditioning with system error correction

Data interface

IO-Link specification 1.1 COM3

Connection to electronic device

Plug connection M8 screw-lock, 4 pin

Transmission rates

IO-Link Spezifikation 230,4kBit/s

IO-Link process data

The probes only have „process data out“ data. These are 32 bit wide and correspond to the position of the measuring pin in nanometers, signed.

Configuration

It is not necessary to configure the probe for operation. According to IODD, a rolling average filter can be configured starting at address 0x0040 of the ISDU. Possible values for the averaging time are 0 to 100 ms.

Documents information

All drawings and 3D models are shown in "electrical zero" position.