T851

Fullbridge Block Gauge with 150.00 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Cable 2 m, cable exit axial.

Articlenumber

1002227

Datasheet

Product Image

Properties

• Total Stroke, Measuring stroke, Pretravel, Pretravel default setting, Bearing, Lifetime, Tip rotation, Temperatur range, Mounting position, Tips, Plug, Cable feature, Cable information
  Total Stroke

  6.0 mm

  Measuring stroke

  ± 1.0 mm

  Pretravel

  adjustable

  Pretravel default setting

  - 1.2 mm

  Bearing

  Ball bearing, no side-play

  Lifetime

  > 10 Mio. Cycles

  Tip rotation

  1° over full stroke

  Temperatur range

  -10 to +65 °C, storage and operation

  Mounting position

  any

  Tips

  can be mounted

  Plug

  M16x0.75, 5-pin, DIN45322

  Cable feature

  PUR shielded, length 2 m

  Cable information

  Outer- Ø 4.0 mm, drag chain compatible
• Advance, Spring rate, Spring rate information, Spring rate optional, Optional pneumatic retraction and feed
  Advance

  spring push

  Spring rate

  1.0 N

  Spring rate information

  at electrical zero, tolerance ± 15%

  Spring rate optional

  0.4 N / 0.63 N / 1.6 N / 2.0 N / 2.5 N / 4.0 N

  Optional pneumatic retraction and feed

  Pneumatic cylinder assembly T800/88000
• Repeatability, Linearity error
  Repeatability

  0.01 µm

  Linearity error

  0.25% FS (full-scale) ± 1000 µm range (at 20 °C ± 1°C)
• Sensitivity, Setting, Amplifier input load, Supply voltage, Drive frequency, Coil scheme
  Sensitivity

  150.00 mV/(Vmm)

  Setting

  1:1

  Amplifier input load

  100 kOhm Input resistance, ± 0.1%

  Supply voltage

  3.0 V ±0.5%RMS

  Drive frequency

  5.0 kHz ±5%

  Coil scheme

  Fullbridge (LVDT)
• Documents information
  Documents information

  All drawings and 3D models are shown in "electrical zero" position.

Documents

Acessories

Drawing T851

CAD Model STEP T801/T851

Application Note - Transducer pin assignment

Assembly drawing Pneumatic cylinder T800/88000

General catalogue Transducer

T800/88000

Articlenumber: 1002214

Pneumatic cylinder for Block Gauge Transducer T800 series.

Tip holder kit 4H T800

Articlenumber: 1003422

Tip holder kit T800 Series. Tip shaft Ø 4 mm. Measuring alignment horizontal.

Tip holder kit 4V T800

Articlenumber: 1003423

Tip holder kit T800 Series. Tip shaft Ø 4 mm. Measuring alignment vertical.

Tip holder kit 6H T800

Articlenumber: 1003424

Tip holder kit T800 Series. Tip shaft Ø 6 mm. Measuring alignment horizontal.

Tip holder kit 6V T800

Articlenumber: 1003425

Tip holder kit T800 Series. Tip shaft Ø 6 mm. Measuring alignment vertical.

Spring 0.4 N T800

Articlenumber: 1004467

Spring 0.4 N optional for Transducer T800.

Spring 0.63 N T800

Articlenumber: 1004468

Spring 0.63 N optional for Transducer T800.

Spring 1.6 N T800

Articlenumber: 1004469

Spring 1.6 N optional for Transducer T800.

Spring 2.0 N T800

Articlenumber: 1004470

Spring 2.0 N optional for Transducer T800.

Spring 2.5 N T800

Articlenumber: 1004471

Spring 2.5 N optional for Transducer T800.

Spring 4.0 N T800

Articlenumber: 1004472

Spring 4.0 N optional for Transducer T800.